Call us:+44 (0) 845 805 9030
Cart 0
100cm wide 0.3mm Stainless Steel Mesh (25 Linear meters Roll) Zoom

100cm wide 0.3mm Stainless Steel Mesh (25 Linear meters Roll)



£ 254.42
- +

Stainless Steel 0.3mm Mesh for Exterior/Interior Shielding (Roll)

A finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

Typical application for exterior and or interior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as a flyscreen.

Technical data

Width: 100 cm

Length: 25 Linear meters roll

Attenuation: 55 dB at 1 GHz (two-layer 80 dB)

Mesh width: 0.3 mm

Wire diameter: 0.08 mm

Material thickness: 0.16 mm

Open area: 62 %

Weight: 200 g/m²

Color: Silver

Fire-proof material, A1 according DIN 4102:1994

Surface conductivity: 0.03 Ohm (square resistance)



In the case of using the EMFSS03 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the EMFSS03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolted or stapled together. The rule is: Always overlap the single elements at least 5 cm. For grounding use the perforated stainless steel tape EMF ELB by screwing it right across the elements into the surface.



Due to the highly conductive surface this material can be contacted and grounded easily to shield low frequency (LF) electric fields. For professional grounding we recommend our Stainless Steel Grounding Tape.


Shielding attenuation

The shielding attenuation is regularly tested in our partner laboratory in Munich to the standards ASTM D4935-10 and/or IEEE-STD-299-2006. The line in the diagram stands for the radial direction of polarisation (both directions, horizontal/vertical) and indicates the attenuation achievable in practice. You find the test report above.

Stainless steel mesh 0.3mm for shielding



Related Products